Ceramic liner plate

Position:Home > PRODUCTS > Wearing Liner series > Ceramic liner plate

3-DEM® Wear-resistant Liners Of Chute

Product Features:

Product Desc:

3-DEM® Chute uses the streamline form u-shaped or circular cross section, By EDEM simulation and analysis techniques to determine the flow of materials, surface force, as well as parts of the wear condition in the chute. The liner materials of chute according to different parts of abradability, properties and wear mechanism to choice in order to achieve equal life

High Chromium Alloy Surfacing Wear-resistant Composite Steel Plate:

The layers of High Chromium Alloy Surfacing Wear-resistant Composite Steel Plate can be reach 4-16mm through advanced technologies and processes on normal steel plate, which has good processability and excellent wear resistance. Dispersed in the wear-resistant layers with high wear resistance of chromium carbide (Cr7C3) and other chrome compound, and its micro-hardness up to HV1400-1800, can effectively resist sand-gravel material wear and tear. Composite steel plates with high hardness and good toughness of double performance and can handle up to 500 degrees, suitable for extremely serious impact and abrasion environment, particularly suitable for the coal chute protection.

High Chromium Alloy Surfacing Wear-resistant Composite Steel Plate



Quenched And Tempered Abrasion Resistant Alloy Steel Plate:

  The base of Quenched And Tempered Abrasion Resistant Alloy Steel Plate is low alloy steels. After quenching and low-temperature heat treatment technology, crystal structure become ultra-fine Bainite and martensite and it achieve to HRC42-50 and with good weldability under heating conditions. Sweden Hardox wear-resistant steel as well as domestic NM450 series are all kind of this steel plates. After heat processing, Wear-resisting performance will be reduced. This kind steel plates are mainly used for large structural parts requiring impact and moderate wear resistance occasion.

Quenched And Tempered Abrasion Resistant Alloy Steel Plate


Stainless Steel Liner

Stainless Steel Liner generally use 440C(Martensitic stainless steel), 2Cr13 or 3Cr13 material, will be helpful to ease the blocking when used for conveying materials with high water content, but provides not good wear resistance.




 

不锈钢衬板


:

     Ceramic Liner which use alumina content of not less than 95% of Al2O3 ceramic material, thickness not less than 25mm and it fixed through high-strength adhesive with special tapered screw on steel substrate offer excellent wear resistance, suitable for guarding chutes particle conveying small granularity, high hardness of material (such as iron ore).

 

陶瓷衬板

 


    High Molecular Weight Polyethylene Liner which molecular weight more than 6 million use to relatively low wear, low friction coefficient and material adhesive and blocking situations, Be able to meet flame-retardant condition needs.